Luminary Series servo drives offer an alternative to OEMs and a cost-competitive alternative to stepper control systems.
Luminary Series Servo Drives provide the OEM market with a low cost but high-performance servo drive for use in applications such as x-y tables, actuators, roll feeders, or any requirement where true position, velocity and torque control are desired. The Luminary Series is a cost-competitive alternative to stepper control systems.
The versatile Luminary drives, LD-500 and the LD-101 are digitally controlled and will drive low-cost servomotors up to 3000 watts. A standard analogue input interface with encoder feedback provides the basic needs of a servomotor drive system. Input selectable velocity or torque mode provides real-time dynamic control.
Optional adaptor cards can piggy-back onto the drive to provide various standard or custom digital control schemes. Currently, the IIS drive network option card is available for multi-axis connectivity using the LMC-400 controller.
A development port connector, for access by the OEM, uses the ISOCOMM1 interface adapter. The ISOCOMM1 provides an isolated RS-232 connection to your PC.
Easy to use PC based L-Drive software for commissioning the system, available at no extra cost, is used for setting up motor / drive parameters and tuning the motor response to the load. Once set, the configuration firmware resides on the board giving the board the correct personality for the motor it will drive.
For more information, please fill out the enquiry form attached to this page.